Mtink: printer maintenance tool

[en]Ubuntu has a printer maintenance tool, called mtink. I tried this tool with my Epson Stylus T11 and worked well.

To install this tool, follow these steps:

Step 1. Install mtink via Terminal.

Enter these command: sudo apt-get install mtink

Step 2. Turn on the printer and connect to computer via usb cable.

Step 3. Open mtink via Terminal.

Enter this command: sudo mtink

Step 4. Set your printer choice and make sure to set port to: dev/usb/lp0

Restart your computer. Now you can view the ink quantity, check nozzle, clean nozzle, and reset your printer.



Tested in:

  • Ubuntu 12.04.2 LTS
  • Epson Stylus T11[/en]

[id]Sebenarnya Ubuntu punya tool maintenance printer, namanya mtink. Saya sudah mencobanya dengan printer saya Epson Stylus T11 dan berjalan dengan baik.

Untuk memasang tool ini, sangat mudah.

Langkah 1. Install mtink lewat Terminal.

Ketikkan: sudo apt-get install mtink

Langkah 2. Hidupkan printer dan hubungkan ke komputer dengan kabel usb.

Langkah 3. Buka mtink lewat Terminal.

Ketikkan: sudo mtink

Langkah 4. Set pilihan printer dan port. Pastikan port diset pada: dev/usb/lp0

Restart komputer, dan kini Anda bisa melihat sisa tinta, check nozzle, clean nozzle, dan mereset printer.



Dicoba pada:

  • Ubuntu 12.04.2 LTS
  • Epson Stylus T11 [/id]


Jika tulisan saya berguna untuk Anda, bolehlah sedikit saweran untuk menyemangati saya berkarya.

CC BY-NC-SA 4.0 This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Leave a Reply

Your email address will not be published. Required fields are marked *

Captcha * Time limit is exhausted. Please reload CAPTCHA.